MEDIUM VISCOSITY - LOW HEMA

✨ Extra Shine – ULTRA No-Wipe Top Coat ✨
Lock in your look with a glass-like finish. Extra Shine is a no-wipe, ultra-gloss top coat that seals and protects your manicure with brilliant, long-lasting shine. Its durable, scratch-resistant formula keeps colors vibrant and resists dulling, chipping, or yellowing — all without a sticky layer to cleanse.

Perfect for use with the ULTRA Structure Base coat and any gel polishcolor application to deliver:
✅ Intense, high-gloss shine
✅ Long-lasting scratch and chip resistance
✅ Smooth, protective seal in one coat

Cure: 60s LED / 99s low heat mode for a flawless, no-wipe finish.
15ml

Ingredients: 
•Acrylates Copolymer
•Hydroxypropyl Methacrylate
•Hydroxycyclohexyl Phenyl Ketone
•2-Hydroxyethyl Methacrylate
•D&C; Violet #2

✨ Acid Primer ✨

The essential first step for long-lasting adhesion.
This Low Acid Primer gently preps and lightly etches the natural nail surface to help gel products adhere more securely. Its low-acid, no-cure formula is designed to minimize irritation while improving performance on problem-prone nails.

✔ Ideal for oily nail plates or clients with poor product retention.

Recommended Prep System:

1️⃣ Low Acid Primer – Prepares the nail plate for optimal adhesion (no cure)
2️⃣ Low Acid Bonder – Reinforces bond strength where needed (no cure)
3️⃣ Clear Base Coat – Smooth, self-leveling foundation (LED cure 60/99s)

15ml bottle provides approximately 115 nail applications ✨

⚠️ IMPORTANT USAGE NOTICE:

Do not apply primer or bonder on every nail by default.
These are acid-based prep products meant specifically for oily or hard-to-retain nails.

Using them on nails that are already dry or well-balanced can lead to over-drying, weakened adhesion, and lifting. Always assess each nail individually and apply only where truly needed.

When used correctly, this prep step supports secure adhesion, efficient application, and up to 4+ weeks of flawless wear.

✨ Acid Bonder ✨

Seal the deal for long-lasting wear.
This Low Acid Bonder creates a strong, flexible bonding layer between the natural nail and gel products, locking in adhesion while maintaining the nail’s natural moisture balance. Its low-acid, no-cure formula is gentle on nails, yet tough on lifting.

✔ Perfect for oily nails or clients with poor product retention.

Recommended Prep System:

1️⃣ Acid Primer – Prepares the nail plate for adhesion (no cure)
2️⃣ Low Acid Bonder – Reinforces bond strength where needed (no cure)
3️⃣ Clear Base Coat – Smooth, self-leveling foundation (LED cure 60/99s)

15ml bottle = approximately 115 nail applications ✨

⚠️ IMPORTANT USAGE NOTICE:

Do not apply primer or bonder to every nail by default.
These are acid-based prep products intended only for oily or problematic nails.

Using them on already dry or well-balanced nails can cause over-drying, weaken retention, and lead to lifting. Always assess the nail condition and apply only where necessary.

When used correctly as part of a targeted prep routine, this system delivers fast prep, secure adhesion, and up to 4+ weeks of flawless wear.

✨Clear Base – Medium Viscosity Formula ✨
Your flawless foundation for any nail look. Clear Base features a medium-viscosity, self-leveling formula that glides on smoothly to create an even, strong base layer. Designed for effortless application, it cures quickly under LED light and helps prevent lifting for extended wear.

✔ Medium viscosity – Easy application with smooth, self-leveling texture.  

✔ Using the Ultra clear base under Ultra Structure Base Coat is a MUST!!!

✔  Now can be used for extensions for short to medium length of 1cm, due to updated stronger formulation. 

For best results for oily nails that have poor product retention use the full ULTRA Line Prep System:
1️⃣ ULTRA Primer – Preps the nail for adhesion (no cure)
2️⃣ ULTRA Bonder – Strengthens the bond layer (no cure)
3️⃣ ULTRA Clear Base – Smooth, self-leveling foundation (LED cure) 60/99s

When used together, this three-step system delivers faster prep, secure adhesion, and up to 4+ weeks of flawless wear.

Ingredients: 
•Epoxy Acrylate Oligomer
•Urethane Acrylate Oligomer
•Hydroxycyclohexyl Phenyl Ketone
•2-Hydroxyethyl Methacrylate

Structure Base – TPO-Free & Low HEMA

The perfect introduction to our new-generation Structure Base Coats

This TPO-free & LOW HEMA formula was designed to enhance quality without changing what you already love. We kept the best ingredients — and upgraded the rest.

✔ Medium viscosity – Easy application with smooth, self-leveling texture

✔ REQUIRES CLEAR BASE! Apply in a thin, even layer

✔ Now supports extensions up to 1cm in length, thanks to a reinforced formula

Recommended Base System

For normal nails with naturally good product retention:
Apply the Clear Base Coat before the Structure Base Coat. Using the Clear Base is essential to ensure proper adhesion and a balanced application.

For oily nails or those with retention issues:
Use the full Prep System, including Acid Primer and Acid Bonder, followed by the Clear Base and then the Structure Base Coat. This maximizes bond strength and long-term wear.

⚠️ IMPORTANT USAGE WARNING:
Do not apply primer and bonder on every nail by default. These are acid-based and should only be used on nails that genuinely require extra adhesion (e.g., excessively oily nail plates).

Applying them to already dry or dehydrated nails can weaken retention and cause the product to work against you — not with you. Over-prepping = over-drying = lifting. Use with care and only when needed.

Key Features

• No more product separation
• TPO-Free & Low HEMA – A high-performance, skin-friendly gel system
• Cures in 60s (LED) / 99s (low heat) – Fast and flexible curing options
• 4+ weeks of wear – Long-lasting and durable results
• 30ml

NEW & IMPROVED COLOUR SHADE

Ingredients:
• Epoxy Acrylate Oligomer
• Urethane Acrylate Oligomer
• Hydroxycyclohexyl Phenyl Ketone
• 2-Hydroxyethyl Methacrylate
• Pigment

Structure Base – TPO-Free & Low HEMA

The perfect introduction to our new-generation Structure Base Coats

This TPO-free & LOW HEMA formula was designed to enhance quality without changing what you already love. We kept the best ingredients — and upgraded the rest.

✔ Medium viscosity – Easy application with smooth, self-leveling texture

✔ REQUIRES CLEAR BASE! Apply in a thin, even layer

✔ Now supports extensions up to 1cm in length, thanks to a reinforced formula

Recommended Base System

For normal nails with naturally good product retention:
Apply the Clear Base Coat before the Structure Base Coat. Using the Clear Base is essential to ensure proper adhesion and a balanced application.

For oily nails or those with retention issues:
Use the full Prep System, including Acid Primer and Acid Bonder, followed by the Clear Base and then the Structure Base Coat. This maximizes bond strength and long-term wear.

⚠️ IMPORTANT USAGE WARNING:
Do not apply primer and bonder on every nail by default. These are acid-based and should only be used on nails that genuinely require extra adhesion (e.g., excessively oily nail plates).

Applying them to already dry or dehydrated nails can weaken retention and cause the product to work against you — not with you. Over-prepping = over-drying = lifting. Use with care and only when needed.

Key Features

• No more product separation
• TPO-Free & Low HEMA – A high-performance, skin-friendly gel system
• Cures in 60s (LED) / 99s (low heat) – Fast and flexible curing options
• 4+ weeks of wear – Long-lasting and durable results
• 15ml

NEW & IMPROVED COLOUR SHADE

Ingredients:
• Epoxy Acrylate Oligomer
• Urethane Acrylate Oligomer
• Hydroxycyclohexyl Phenyl Ketone
• 2-Hydroxyethyl Methacrylate
• Pigment

Structure Base – TPO-Free & Low HEMA

The perfect introduction to our new-generation Structure Base Coats

This TPO-free & LOW HEMA formula was designed to enhance quality without changing what you already love. We kept the best ingredients — and upgraded the rest.

✔ Medium viscosity – Easy application with smooth, self-leveling texture

✔ REQUIRES CLEAR BASE! Apply in a thin, even layer

✔ Now supports extensions up to 1cm in length, thanks to a reinforced formula

Recommended Base System

For normal nails with naturally good product retention:
Apply the Clear Base Coat before the Structure Base Coat. Using the Clear Base is essential to ensure proper adhesion and a balanced application.

For oily nails or those with retention issues:
Use the full Prep System, including Acid Primer and Acid Bonder, followed by the Clear Base and then the Structure Base Coat. This maximizes bond strength and long-term wear.

⚠️ IMPORTANT USAGE WARNING:
Do not apply primer and bonder on every nail by default. These are acid-based and should only be used on nails that genuinely require extra adhesion (e.g., excessively oily nail plates).

Applying them to already dry or dehydrated nails can weaken retention and cause the product to work against you — not with you. Over-prepping = over-drying = lifting. Use with care and only when needed.

Key Features

• No more product separation
• TPO-Free & Low HEMA – A high-performance, skin-friendly gel system
• Cures in 60s (LED) / 99s (low heat) – Fast and flexible curing options
• 4+ weeks of wear – Long-lasting and durable results
• 30ml

NEW & IMPROVED COLOUR SHADE

Ingredients:
• Epoxy Acrylate Oligomer
• Urethane Acrylate Oligomer
• Hydroxycyclohexyl Phenyl Ketone
• 2-Hydroxyethyl Methacrylate
• Pigment

Structure Base – TPO-Free & Low HEMA

The perfect introduction to our new-generation Structure Base Coats

This TPO-free & LOW HEMA formula was designed to enhance quality without changing what you already love. We kept the best ingredients — and upgraded the rest.

✔ Medium viscosity – Easy application with smooth, self-leveling texture

✔ REQUIRES CLEAR BASE! Apply in a thin, even layer

✔ Now supports extensions up to 1cm in length, thanks to a reinforced formula

Recommended Base System

For normal nails with naturally good product retention:
Apply the Clear Base Coat before the Structure Base Coat. Using the Clear Base is essential to ensure proper adhesion and a balanced application.

For oily nails or those with retention issues:
Use the full Prep System, including Acid Primer and Acid Bonder, followed by the Clear Base and then the Structure Base Coat. This maximizes bond strength and long-term wear.

⚠️ IMPORTANT USAGE WARNING:
Do not apply primer and bonder on every nail by default. These are acid-based and should only be used on nails that genuinely require extra adhesion (e.g., excessively oily nail plates).

Applying them to already dry or dehydrated nails can weaken retention and cause the product to work against you — not with you. Over-prepping = over-drying = lifting. Use with care and only when needed.

Key Features

• No more product separation
• TPO-Free & Low HEMA – A high-performance, skin-friendly gel system
• Cures in 60s (LED) / 99s (low heat) – Fast and flexible curing options
• 4+ weeks of wear – Long-lasting and durable results
• 15ml

NEW & IMPROVED COLOUR SHADE

Ingredients:
• Epoxy Acrylate Oligomer
• Urethane Acrylate Oligomer
• Hydroxycyclohexyl Phenyl Ketone
• 2-Hydroxyethyl Methacrylate
• Pigment

Structure Base – TPO-Free & Low HEMA

The perfect introduction to our new-generation Structure Base Coats

This TPO-free & LOW HEMA formula was designed to enhance quality without changing what you already love. We kept the best ingredients — and upgraded the rest.

✔ Medium viscosity – Easy application with smooth, self-leveling texture

✔ REQUIRES CLEAR BASE! Apply in a thin, even layer

✔ Now supports extensions up to 1cm in length, thanks to a reinforced formula

Recommended Base System

For normal nails with naturally good product retention:
Apply the Clear Base Coat before the Structure Base Coat. Using the Clear Base is essential to ensure proper adhesion and a balanced application.

For oily nails or those with retention issues:
Use the full Prep System, including Acid Primer and Acid Bonder, followed by the Clear Base and then the Structure Base Coat. This maximizes bond strength and long-term wear.

⚠️ IMPORTANT USAGE WARNING:
Do not apply primer and bonder on every nail by default. These are acid-based and should only be used on nails that genuinely require extra adhesion (e.g., excessively oily nail plates).

Applying them to already dry or dehydrated nails can weaken retention and cause the product to work against you — not with you. Over-prepping = over-drying = lifting. Use with care and only when needed.

Key Features

• No more product separation
• TPO-Free & Low HEMA – A high-performance, skin-friendly gel system
• Cures in 60s (LED) / 99s (low heat) – Fast and flexible curing options
• 4+ weeks of wear – Long-lasting and durable results
• 30ml

NEW & IMPROVED COLOUR SHADE

Ingredients:
• Epoxy Acrylate Oligomer
• Urethane Acrylate Oligomer
• Hydroxycyclohexyl Phenyl Ketone
• 2-Hydroxyethyl Methacrylate
• Pigment

Structure Base – TPO-Free & Low HEMA

The perfect introduction to our new-generation Structure Base Coats

This TPO-free & LOW HEMA formula was designed to enhance quality without changing what you already love. We kept the best ingredients — and upgraded the rest.

✔ Medium viscosity – Easy application with smooth, self-leveling texture

✔ REQUIRES CLEAR BASE! Apply in a thin, even layer

✔ Now supports extensions up to 1cm in length, thanks to a reinforced formula

Recommended Base System

For normal nails with naturally good product retention:
Apply the Clear Base Coat before the Structure Base Coat. Using the Clear Base is essential to ensure proper adhesion and a balanced application.

For oily nails or those with retention issues:
Use the full Prep System, including Acid Primer and Acid Bonder, followed by the Clear Base and then the Structure Base Coat. This maximizes bond strength and long-term wear.

⚠️ IMPORTANT USAGE WARNING:
Do not apply primer and bonder on every nail by default. These are acid-based and should only be used on nails that genuinely require extra adhesion (e.g., excessively oily nail plates).

Applying them to already dry or dehydrated nails can weaken retention and cause the product to work against you — not with you. Over-prepping = over-drying = lifting. Use with care and only when needed.

Key Features

• No more product separation
• TPO-Free & Low HEMA – A high-performance, skin-friendly gel system
• Cures in 60s (LED) / 99s (low heat) – Fast and flexible curing options
• 4+ weeks of wear – Long-lasting and durable results
• 15ml

NEW & IMPROVED COLOUR SHADE

Ingredients:
• Epoxy Acrylate Oligomer
• Urethane Acrylate Oligomer
• Hydroxycyclohexyl Phenyl Ketone
• 2-Hydroxyethyl Methacrylate
• Pigment

Structure Base – TPO-Free & Low HEMA

The perfect introduction to our new-generation Structure Base Coats

This TPO-free & LOW HEMA formula was designed to enhance quality without changing what you already love. We kept the best ingredients — and upgraded the rest.

✔ Medium viscosity – Easy application with smooth, self-leveling texture

✔ REQUIRES CLEAR BASE! Apply in a thin, even layer

✔ Now supports extensions up to 1cm in length, thanks to a reinforced formula

Recommended Base System

For normal nails with naturally good product retention:
Apply the Clear Base Coat before the Structure Base Coat. Using the Clear Base is essential to ensure proper adhesion and a balanced application.

For oily nails or those with retention issues:
Use the full Prep System, including Acid Primer and Acid Bonder, followed by the Clear Base and then the Structure Base Coat. This maximizes bond strength and long-term wear.

⚠️ IMPORTANT USAGE WARNING:
Do not apply primer and bonder on every nail by default. These are acid-based and should only be used on nails that genuinely require extra adhesion (e.g., excessively oily nail plates).

Applying them to already dry or dehydrated nails can weaken retention and cause the product to work against you — not with you. Over-prepping = over-drying = lifting. Use with care and only when needed.

Key Features

• No more product separation
• TPO-Free & Low HEMA – A high-performance, skin-friendly gel system
• Cures in 60s (LED) / 99s (low heat) – Fast and flexible curing options
• 4+ weeks of wear – Long-lasting and durable results
• 30ml

NEW & IMPROVED COLOUR SHADE

Ingredients:
• Epoxy Acrylate Oligomer
• Urethane Acrylate Oligomer
• Hydroxycyclohexyl Phenyl Ketone
• 2-Hydroxyethyl Methacrylate
• Pigment

Structure Base – TPO-Free & Low HEMA

The perfect introduction to our new-generation Structure Base Coats

This TPO-free & LOW HEMA formula was designed to enhance quality without changing what you already love. We kept the best ingredients — and upgraded the rest.

✔ Medium viscosity – Easy application with smooth, self-leveling texture

✔ REQUIRES CLEAR BASE! Apply in a thin, even layer

✔ Now supports extensions up to 1cm in length, thanks to a reinforced formula

Recommended Base System

For normal nails with naturally good product retention:
Apply the Clear Base Coat before the Structure Base Coat. Using the Clear Base is essential to ensure proper adhesion and a balanced application.

For oily nails or those with retention issues:
Use the full Prep System, including Acid Primer and Acid Bonder, followed by the Clear Base and then the Structure Base Coat. This maximizes bond strength and long-term wear.

⚠️ IMPORTANT USAGE WARNING:
Do not apply primer and bonder on every nail by default. These are acid-based and should only be used on nails that genuinely require extra adhesion (e.g., excessively oily nail plates).

Applying them to already dry or dehydrated nails can weaken retention and cause the product to work against you — not with you. Over-prepping = over-drying = lifting. Use with care and only when needed.

Key Features

• No more product separation
• TPO-Free & Low HEMA – A high-performance, skin-friendly gel system
• Cures in 60s (LED) / 99s (low heat) – Fast and flexible curing options
• 4+ weeks of wear – Long-lasting and durable results
• 15ml

NEW & IMPROVED COLOUR SHADE

Ingredients:
• Epoxy Acrylate Oligomer
• Urethane Acrylate Oligomer
• Hydroxycyclohexyl Phenyl Ketone
• 2-Hydroxyethyl Methacrylate
• Pigment

Structure Base – TPO-Free & Low HEMA

The perfect introduction to our new-generation Structure Base Coats

This TPO-free & LOW HEMA formula was designed to enhance quality without changing what you already love. We kept the best ingredients — and upgraded the rest.

✔ Medium viscosity – Easy application with smooth, self-leveling texture

✔ REQUIRES CLEAR BASE! Apply in a thin, even layer

✔ Now supports extensions up to 1cm in length, thanks to a reinforced formula

Recommended Base System

For normal nails with naturally good product retention:
Apply the Clear Base Coat before the Structure Base Coat. Using the Clear Base is essential to ensure proper adhesion and a balanced application.

For oily nails or those with retention issues:
Use the full Prep System, including Acid Primer and Acid Bonder, followed by the Clear Base and then the Structure Base Coat. This maximizes bond strength and long-term wear.

⚠️ IMPORTANT USAGE WARNING:
Do not apply primer and bonder on every nail by default. These are acid-based and should only be used on nails that genuinely require extra adhesion (e.g., excessively oily nail plates).

Applying them to already dry or dehydrated nails can weaken retention and cause the product to work against you — not with you. Over-prepping = over-drying = lifting. Use with care and only when needed.

Key Features

• No more product separation
• TPO-Free & Low HEMA – A high-performance, skin-friendly gel system
• Cures in 60s (LED) / 99s (low heat) – Fast and flexible curing options
• 4+ weeks of wear – Long-lasting and durable results
• 15ml

NEW & IMPROVED COLOUR SHADE

Ingredients:
• Epoxy Acrylate Oligomer
• Urethane Acrylate Oligomer
• Hydroxycyclohexyl Phenyl Ketone
• 2-Hydroxyethyl Methacrylate
• Pigment

Structure Base – TPO-Free & Low HEMA

The perfect introduction to our new-generation Structure Base Coats

This TPO-free & LOW HEMA formula was designed to enhance quality without changing what you already love. We kept the best ingredients — and upgraded the rest.

✔ Medium viscosity – Easy application with smooth, self-leveling texture

✔ REQUIRES CLEAR BASE! Apply in a thin, even layer

✔ Now supports extensions up to 1cm in length, thanks to a reinforced formula

Recommended Base System

For normal nails with naturally good product retention:
Apply the Clear Base Coat before the Structure Base Coat. Using the Clear Base is essential to ensure proper adhesion and a balanced application.

For oily nails or those with retention issues:
Use the full Prep System, including Acid Primer and Acid Bonder, followed by the Clear Base and then the Structure Base Coat. This maximizes bond strength and long-term wear.

⚠️ IMPORTANT USAGE WARNING:
Do not apply primer and bonder on every nail by default. These are acid-based and should only be used on nails that genuinely require extra adhesion (e.g., excessively oily nail plates).

Applying them to already dry or dehydrated nails can weaken retention and cause the product to work against you — not with you. Over-prepping = over-drying = lifting. Use with care and only when needed.

Key Features

• No more product separation
• TPO-Free & Low HEMA – A high-performance, skin-friendly gel system
• Cures in 60s (LED) / 99s (low heat) – Fast and flexible curing options
• 4+ weeks of wear – Long-lasting and durable results
• 15ml

NEW & IMPROVED COLOUR SHADE

Ingredients:
• Epoxy Acrylate Oligomer
• Urethane Acrylate Oligomer
• Hydroxycyclohexyl Phenyl Ketone
• 2-Hydroxyethyl Methacrylate
• Pigment

Structure Base – TPO-Free & Low HEMA

The perfect introduction to our new-generation Structure Base Coats

This TPO-free & LOW HEMA formula was designed to enhance quality without changing what you already love. We kept the best ingredients — and upgraded the rest.

✔ Medium viscosity – Easy application with smooth, self-leveling texture

✔ REQUIRES CLEAR BASE! Apply in a thin, even layer

✔ Now supports extensions up to 1cm in length, thanks to a reinforced formula

Recommended Base System

For normal nails with naturally good product retention:
Apply the Clear Base Coat before the Structure Base Coat. Using the Clear Base is essential to ensure proper adhesion and a balanced application.

For oily nails or those with retention issues:
Use the full Prep System, including Acid Primer and Acid Bonder, followed by the Clear Base and then the Structure Base Coat. This maximizes bond strength and long-term wear.

⚠️ IMPORTANT USAGE WARNING:
Do not apply primer and bonder on every nail by default. These are acid-based and should only be used on nails that genuinely require extra adhesion (e.g., excessively oily nail plates).

Applying them to already dry or dehydrated nails can weaken retention and cause the product to work against you — not with you. Over-prepping = over-drying = lifting. Use with care and only when needed.

Key Features

• No more product separation
• TPO-Free & Low HEMA – A high-performance, skin-friendly gel system
• Cures in 60s (LED) / 99s (low heat) – Fast and flexible curing options
• 4+ weeks of wear – Long-lasting and durable results
• 15ml

NEW & IMPROVED COLOUR SHADE

Ingredients:
• Epoxy Acrylate Oligomer
• Urethane Acrylate Oligomer
• Hydroxycyclohexyl Phenyl Ketone
• 2-Hydroxyethyl Methacrylate
• Pigment